Handheld Pulse Laser Rust Remover Machine Laser Cleaning Manufacturer

• Customization: Available
• Power: 1000w
• Warranty: 1 Year
• Laser: Jpt
• Water Cooler: Hanli
• Cleaning Head: Mingzu
• Cleaning System: Mingzu
• Fiber Length: 10m
• Maximum Modulation Frequency: 4kHz
• Power Regulation Range: 10-100%
• Laser Wavelength: 1064nm
• Cooling Mode: Water-Cooling
• Tank Capacity: 13L
• Rated Power of The Whole Machine: 2500W
• Power Requirements: 220V50Hz/60Hz
• Focal Length: 300mm
• Sweep Frequency: 300Hz
• Incident Spot Diameter: ≤10mm
• Transport Package: Export of Wooden Crates
• Specification: 1100*550*900mm
• Trademark: MZLASER
• Origin: Qingdao China
• Package Size: 110.00cm * 50.00cm * 90.00cm
• Package Gross Weight: 165.000kg

Product Description

Product Overview

Pulsed laser cleaning machine is an advanced device that uses high-energy, short-pulse laser beams to irradiate the surface of workpieces, causing surface contaminants (such as rust, paint, oil stains, coatings, oxides, etc.) to instantly vaporize, vibrate or peel off, thereby achieving precise and efficient cleaning.

 

Compared with traditional cleaning methods such as sandblasting, chemical solvents and mechanical grinding, it is a "contactless, wear-free and environmentally friendly" cleaning technology, and is hailed as the "cleaning revolution of the 21st century".

 

Core principle analogy

Imagine that when you pat a wet towel with your hand, the water droplets will be shaken away while the towel itself remains intact. similarly, by adjusting laser pulses to specific parameters, it is like countless precise "photon palms", only shaking off attachments without causing any damage to the substrate.

Core advantages and features of the product

1.It is precise and non-destructive, capable of removing micron-level dirt while perfectly preserving the base material itself. It is of vital importance in scenarios such as precision components and cultural relic restoration.

2. Environmentally friendly and green, it does not require chemical solvents and causes no secondary pollution. The waste after cleaning is mainly solid dust, which is easy to collect and treat.

3. The highly efficient and controllable cleaning process is automated, with a speed ranging from several square centimeters to tens of square centimeters per second. The parameters are digitized, and the results are consistent.

4. Non-contact and free of mechanical stress, it will not cause damage to fragile, soft or complex-shaped workpieces.

5. The operation is flexible and can be transmitted through optical fibers. When combined with robots or 3D workbenches, it can easily clean areas that are difficult to reach by traditional methods.

6. Low operating cost: The main energy consumption is electricity. Long-term use requires very few consumables, which is far lower than the continuous purchase cost of chemicals or the consumption cost of abrasives.

Main application fields

Mold industry:

· Tire mold: Efficiently remove vulcanization residues without damaging the mold pattern.

· Injection mold: Remove oil stains, mold release agent residues, and pigment deposits.

High-end manufacturing industry:

· Pre-welding/post-welding treatment: Remove the oxide layer and oil stains before welding to ensure welding quality; Clean the oxidized color and welding slag after welding.

· Precision components: Cleaning engine parts, aerospace components, semiconductor components, etc.

Automobiles and Rail Transit:

· Body welding assembly line: Clean the robot's grasping points to ensure welding accuracy.

· Component repair: Remove carbon deposits and coatings from brake pads, pistons and other parts.

Cultural Relics Protection and Restoration:

· Stone cultural relics: Remove the black crust and contaminants on the surface without damaging the original body of the cultural relics.

· Metal cultural relics: Remove rust and restore their original appearance.

Electronic and electrical industry:

· Circuit Board (PCB) : Remove the oxide on the pads to improve solderability.

· Battery electrode sheet: Clean the electrode coating to prepare for welding.

Architecture and Stone:

· Clean the exterior walls and stone carvings of historical buildings and remove graffiti (graffiti).